Charging The Appliance - Philips daisy HR6061 Gebrauchsanweisung

C
The crevice tool can be placed in their
appropriate holding slots.

Charging the appliance

1 Make sure that the switch of the vacuum
cleaner is in position 0 (off) during
charging.
No charging will occur if the switch is at an other
position.
2 Insert the charger plug into the wall
socket.
C
3 Place the vacuum cleaner onto the holder.
C
The indicator light will come on to indicate
that the appliance is charging.
The indicator light will be on as long as the
appliance is connected to the wall holder and the
plug is in the wall socket.
The indicator light does not give any information
about the charge level of the built-in batteries.
Charge the appliance for at least 16 hours before
you use it for the first time.
Recharge the appliance as soon as the motor
power decreases noticeably.
ENGLISH
5