Siemens SINAUT ST7 Betriebsanleitung Seite 111

S-Register
Register 53 — Letzter Auflegegrund
Standardwert: 0
Wertebereich: 0 – 127
Bedeutung:
6NH7811-0AA41
7-14
Aus diesem Register kann ausgelesen werden, aus welchem
Grund die letzte Verbindung beendet wurde. Mögliche Werte sind:
1: Unallocated number
2: No route to specified transit network
3: No route to destination
6: Channel unacceptable
7: Call awarded and being delivered in an established channel
16: Normal call clearing
17: User busy
18: No user responding
19: No answer from user (user alerted)
21: Call rejected
22: Number changed
26: Non-selected user clearing
27: Destination out of order
28: Invalid number format
29: Facility rejected
30: Response to STATUS REQUIRY
31: Normal, unspecified
34: No circuit/channel available
38: Network out of order
41: Temporary failure
42: Switching equipment congestion
43: Acces information discarded
44: Requested circuit/channel not available
47: Resources unavailable, unspecified
49: Quality of service unavailable
50: Requested facility not subsribed
57: Bearer capability not authorized
58: Bearer capability not presently available
63: Service or option not available, unspecified
65: Bearer capability not implemented
66: Channel type not implemented
69: Requested facility not implemented
70: Only restricted digital information bearer capability is
available
79: Service or option not implemented, unspecified
81: Invalid call reference value
82: Identified channel does not exist
83: A suspended call exists, but this call identity does not
84: Call identity in use
85: No call suspended
86: Call having the requested call identity has been cleared
88: Incompatible destination
91: Invalid transit network selection
95: Invalid message, unspecified
96: Mandatory information element is missing
97: Message type non-existent or not implemented
98: Message not compatible with call state
99: Information element non-existent or not implemented
© Siemens AG 2002 All Rights Reserved
Modem MD4 (07/2002)