Table 3: Diagnostic Parameters, Inputs - Siemens SIMATIC S7-300/400 Betriebsanleitung

User Manual SICLOCK DCF77 Reception Service for SIMATIC S7-300/400
Name Type
Imp_kurz_min INT
Imp_kurz_max INT
Imp_lang_min INT
Imp_lang_max INT
Sync_min INT
Sync_max INT

Table 3: Diagnostic parameters, inputs

Document order No.: 2XV9450-1AR33
Use
Minimum pulse length of the 100ms pulse, indicated in multiples of 10ms. In
case of 0 the default value is used.
Default value: 7 corresponds to 70ms
Maximum pulse length of the 100ms pulse, indicated in multiples of 10ms. In
case of 0 the default value is used.
Default value: 14 corresponds to 140ms
Minimum pulse length of the 200ms pulse, indicated in multiples of 10ms. In
case of 0 the default value is used.
Default value: 16 corresponds to 160ms.
Maximum pulse length of the 200ms pulse, indicated in multiples of 10ms. In
case of 0 the default value is used.
Default value: 24 corresponds to 240ms
Minimum length of the minute mark at 59
10ms. In case of 0 the default value is used.
Default value: 160 corresponds to 1600ms.
Maximum length of the minute mark at 59
10ms. In case of 0 the default value is used.
Default value: 210 corresponds to 2100ms.
Version 3.0
th
Second, indicated in multiples of
th
Second, indicated in multiples of
Page 9 of 17