Operation - LGB 65000 Bedienungsanleitung

(see INSTRUCTIONS FOR
ADVANCED USERS).

OPERATION

Analog operation: As soon as a low
voltage is on the tracks, you hear the
standing sounds. When track voltage
increases, you hear the drive sounds,
which are synchronized to the volt-
age in the tracks.
Hint: You can program the drive
sounds to start exactly when the loco
starts. You need a PC and the 55045
MTS PC Decoder Programming
Module or the 55015 Universal
Remote (see INSTRUCTIONS FOR
ADVANCED USERS).
Multi-Train System
The Sound Unit is equipped a facto-
ry-installed sound decoder for the
LGB Multi-Train System. It can be
used without modifications on ana-
log or digital layouts. For operation
with the Multi-Train System, the
Sound Unit is programmed to loco
address 03. For information on pro-
gramming the loco address, see the
instructions for various MTS compo-
nents.
When operating with the Multi-Train
System, you hear the standing
sounds while the loco is standing.
When you turn up the MTS throttle,
you hear the drive sounds synchro-
nized to the drive steps.
When operating with the Multi-Train
System, you can remotely control the
sound functions. Press the function
buttons to control the following func-
tions
65000 European Steam Sound Unit
1: Whistle
2: Brake sound
3: Bell
4: Conductor announcement:
"Einsteigen bitte!" (All aboard,
please!), whistle
5: Air pump
6: Coal shoveling
7: Not used
8: Sound off/on
65001 American Steam Sound Unit
1: Whistle signal "crossing" (2 long,
1 short, 1 long blasts)
2: Brake sound
3: Bell
4: Conductor announcement: "All
aboard!"
5: Air pump
6: Coal shoveling
7: Not used
8: Sound off/on
65002 European Diesel Sound Unit
1: Horn
2: Brake sound
3: Bell
4: Conductor announcement: "Bitte
einsteigen!" (All aboard, please!)
5: Air compressor
6: Diesel engine off/on
7: Safety valve
8: Sound off/on
65003 American Diesel Sound Unit
1: Horn signal "crossing"
2: Brake sound
3: Bell
4: Announcement: "High Ball, John!"
5: Air release for brake
6: Diesel engine off/on
7: Alarm bell
8: Sound off/on
65004 European Electric Loco
Sound Unit
1: Whistle
2: Brake sound
3: Pantograph sound
4: Conductor announcement: "Bitte
einsteigen!" (All aboard, please!)
5: Air compressor sound
6: Turning off the loco: Main fan off,
vacuum pump, main switch
11