Fronius Datamanager Bedienungsanleitung Seite 98

8
9
10
96
Select either a static or dynamic IP address (3)
Obtaining a static IP address (factory setting):
- The user enters a fixed (static) IP address for Fronius Datamanager and also
manually sets the subnet mask, gateway address and DNS server address (from
the provider).
Obtain IP address dynamically:
- Fronius Datamanager obtains its IP address from a DHCP server (DHCP = dy-
namic host configuration protocol).
- The DHCP server must be configured so that Fronius Datamanager is always as-
signed the same IP address. You will then always know the IP address at which
Fronius Datamanager can be found.
- If the DHCP server supports the "DNS dynamic updates" function, a name can be
entered for Fronius Datamanager in the "Host name" field. The connection to Fro-
nius Datamanager can then be established using the name instead of the IP ad-
dress.
Example: Host name = sample system, Domain name = fronius.com
Fronius Datamanager can be accessed using the address "samplesystem.fro-
nius.com"
Click on "Save" (4)
After the changes have been loaded, the "Changes have been applied" message ap-
pears.
Click on "OK"
The interface settings are displayed (LAN or WLAN).
(3)
(4)