Starting Up Fronius Datamanager And Accessing The Fronius Datamanager Web Interface - Fronius Datamanager Bedienungsanleitung

Starting up Fro- To start up Fronius Datamanager, the plug-in card must be installed in the inverter and in
nius Dataman- the Fronius Solar Net.
ager and
accessing the
1
Fronius Dataman-
ager web inter-
face
2
3
4
5
6
7
Turn off inverter
WARNING! An electric shock can be fatal. Danger from grid voltage and DC volt-
age from solar modules.
Before opening the inverter:
- You must wait until the capacitors have discharged.
- Follow the operating instructions when opening the inverter.
- Observe the safety guidelines and safety information contained in the invert-
er's operating instructions.
Opening the Inverter
Inside the inverter, set the jumper IP address for Fronius Datamanager as shown in
the diagram:
Close and switch on the inverter in accordance with the operating instructions
Wait approx. 1 minute until the "Connectivity" icon appears in the PC/laptop taskbar:
Open the PC's/laptop's internet browser (e.g. Microsoft Internet Explorer)
Enter http://169.254.0.180 in the address field
The Fronius Datamanager web interface will appear.
1
2
93