Views; General; General" View; Inverter Views - Fronius Datamanager Bedienungsanleitung

Views

General

The Fronius Datamanager web interface is configured in the views.
In the General, Inverters and Sensor Cards submenus, it is possible to set the yield and
data for the Comparison View and Total View, and also settings for the inverters and sen-
sor cards.
The views also include explanations of the setting options which are shown in the top right
corner of the Fronius Datamanager web interface.

"General" view

You can enter the charge rate per kWh and the currency for calculating the yield in "Yield"
(1). The yield is shown in the current Total View.
You can enter the CO
CO

Inverter views

The data for the Comparison View is defined in "Inverters:"
1
2
3
124
(1)
(2)
savings per kWh and the unit for calculating the CO
2
factor (2). The CO savings are shown in the current Total View.
2 2
Select an inverter to be displayed in the Comparison view
Enter the respective solar module power for each inverter (the nominal output of the
inverter is entered by default)
Assign PV power to the relevant inverter using the "Accept" button
savings in
2