Setting The Ip Address And Connecting Fronius Datamanager To The Network - Fronius Datamanager Bedienungsanleitung

Setting the IP ad-
1
dress and con-
necting Fronius
Datamanager to
the network
2
3
4
5
100
Turn off inverter
WARNING! An electric shock can be fatal. Danger from grid voltage and DC volt-
age from solar modules.
Before opening the inverter:
- You must wait until the capacitors have discharged.
- Follow the operating instructions when opening the inverter.
- Observe the safety guidelines and safety information contained in the invert-
er's operating instructions.
Opening the Inverter
Inside the inverter, reset the jumper IP address on the Fronius Manager plug-in card,
as shown in the diagram:
Close and switch on the inverter in accordance with the operating instructions
The network settings will be applied
Connect Fronius Datamanager to the relevant network via the LAN or WLAN connec-
tion.
1
2