A System Description - SAFEX FlowMarker II Gebrauchsanleitung

7 /
34 • GAFM-II-10.12
SAFEX
MODIFICATIONES TO
PREVIOUS MODEL
A SYSTEM DESCRIPTION
® -FLOWMARKER-II
For best use in all fields of application of the
ommended to read this instruction carefully even
previous model.
This instruction manual is to be supplemented if necessary with the instructions of each
ancillary used, optional
The safety instructions and all sections marked with the attention sign are espe-
cially important and should be given particular consideration.
®
The SAFEX -FlowMarker
predecessor:

The functions of the device are now
allows improved operation, equipped with more features!

The unit now contains as
tion with a remote control.

The activation of the
(Switching function, no longer touch function). The fog flow is now
short push onto the blue FOG-button
again, in the same way as it has to be done with the new remote control's.

Due to the new, integrated
the so-called
production is been done.
MODE when continuously not be used and finally - after a longer non-use - the unit
turns itself off completely.

The battery capacity is spared in this way, the unit will remain longer ready for use
and also a harmful deep discharge of the battery is prevented.

The SLEEP MODE
mains active for remote control.

In addition to the automatic shutdown after prolonged non-use or lack of battery
power, the device is now also equipped with a
which it can be turned off at any time completely.

In addition, the new
®
The SAFEX -FlowMarker
and photographic documentation of slow and weak airflows in the fields of science and
technology. Fog is produced with the world's unique and completely harmless
theatrical fog fluids.
The generation of
problems of airflow visualization.
In areas with a calm airflow, even small cavities can be filled with fog. This fog, as if
flowing like water, forms a "fog lake" on the surface where even very weak airflows can
be recognized.
Furthermore, new, additional system components, such as the
©
TEM are available which makes it now possible, to insert the fog for example via hoses
SAFEX
®
FlowMarker accessory.
®
Model II has been considerably improved
controlled by a microprocessor,
standard a remote control socket
FOG FLOW will now be done by
and as well shut off by pressing the button
microprocessor
ENERGY-SAVING -MODE for saving some battery capacity
It further will be switched into the so-called
ensures that the unit uses very little battery power, but it
MODEL II is optimized for
®
Fog Generator was especially developed for the visualization
low-impulse, thermal neutral fog
® ®
- FlowMarker Model II, it is rec-
if one is already familiar with the
compared to its
for instant connec-
an ON/OFF Switching
turned on by a
the device automatically switches into
if no fog
manual shut-off function,
new accessories.
helps to solve even very difficult
FM-HYDRA-TUBE SYS-
which
SLEEP
re-
with
®
SAFEX