Yamaha PSR-530 Bedienungsanleitung Seite 117

QQQQQQQQQQQQQQ
données MIDI / Formato de datos MIDI
PITCH FINE
LEVEL
PANPOT
REVERB SEND
CHORUS SEND
VARIATION SEND
RPN LSB
RPN MSB
PITCH BEND SENS.
FINE TUNING
COARSE TUNING
NULL
ALL SOUND OFF
RESET ALL CONTROLLERS
ALL NOTES OFF
OMNI OFF
OMNI ON
MONO
POLY
PROGRAM CHANGE
CHANNEL AFTER TOUCH
PITCH BEND CHANGE
SYSTEM EXCLUSIVE MESSAGE
<YAMAHA MIDI FORMAT>
<UNIVERSAL>
UNIVERSAL REALTIME
UNIVERSAL NON-REALTIME
<XG STANDARD>
XG PARAMETER CHANGE
XG BULK DUMP
PARAMETER REQUEST
DUMP REQUEST
SPECIAL OPERATORS
Others
SYSTEM REALTIME MESSAGE
MIDI CLOCK
START
STOP
ACTIVE SENSING
(3) TRANSMIT/RECEIVE DATA
(3-1) CHANNEL VOICE MESSAGES
(3-1-1) NOTE OFF (Recive only)
STATUS
NOTE NUMBER
VELOCITY
(3-1-2) NOTE ON/OFF
STATUS
NOTE NUMBER
VELOCITY
(3-1-3) PROGRAM CHANGE
STATUS
PROGRAM NUMBER 0ppppppp
* PROGRAM NUMBER: XG DRUM VOICE number correspondence
P = 0 Standard Kit
P = 1 Standard2 Kit
P = 8 Room Kit
P = 16 Rock Kit
P = 24 Elctrnic Kit
P = 25 Analog Kit
P = 27 Dance Kit
P = 32 Jazz Kit
P = 40 Brush Kit
P = 48 Classic Kit
* PROGRAM NUMBER: XG SFX KIT number correspondence
P = 1 SFX1 Kit
P = 2 SFX2 Kit
When DRUM VOICE is selected and program change data for a different DRUM
VOICE is received, the currently selected DRUM VOICE will be replaced with the
new DRUM VOICE.
BnH,63H,19H,62H,rrH,06H,mmH
BnH,63H,1AH,62H,rrH,06H,mmH
BnH,63H,1CH,62H,rrH,06H,mmH
BnH,63H,1DH,62H,rrH,06H,mmH
BnH,63H,1EH,62H,rrH,06H,mmH
BnH,63H,1FH,62H,rrH,06H,mmH
BnH,64H
BnH,65H
BnH,65H,00H,64H,00H,06H,mmH
BnH,65H,00H,64H,01H,06H,mmH,
BnH,65H,00H,64H,02H,06H,mmH
BnH,65H,7FH,64H,7FH
BnH,78H,00H
BnH,79H,00H
BnH,7BH
BnH,7CH
BnH,7DH
BnH,7EH
BnH,7FH
CnH
DnH
EnH
F0H 7FH.....F7H
F0H 4EH.....F7H
F0H 43H 1nH 4CH aaH aaH aaH ddH
F0H 43H 0nH 4CH bbH bbH aaH aaH
aaH ddH.....ddH ccH F7H
F0H 43H 3nH 4CH aaH aaH aaH F7H
F0H 43H 2nH 4CH aaH aaH aaH F7H
F8H
FAH
FCH
FEH
1000nnnn (8nH) n = 0 - 15 VOICE CHANNEL NUMBER
0kkkkkkk k = 0 (C-2) - 127 (G8)
0vvvvvvv v: ignored
1001nnnn (9nH) n = 0 - 15 VOICE CHANNEL NUMBER
0kkkkkkk k = 0 (C-2) - 127 (G8)
(v ≠ 0) NOTE ON
0vvvvvvv
00000000 (v = 0) NOTE OFF
1100nnnn (CnH) n = 0 - 15 VOICE CHANNEL NUMBER
p = 0 - 127
(3-1-4) CHANNEL AFTER TOUCH (Recive only)
STATUS
VALUE
(3-1-5) PITCH BEND CHANGE
STATUS
LSB
MSB
(3-1-6) CONTROL CHANGE
26H,llH
STATUS
CONTROL NUMBER 0ccccccc
CONTROL VALUE
* Transmit CONTROL NUMBER.
c = 0
c = 32
c = 6
c = 38
c = 7
c = 10
c = 11
c = 64
c = 66
c = 67
c = 91
c = 94
* Receive CONTROL NUMBER.
c = 0
.....ddH F7H
c = 32
c = 1
c = 5
c = 6
c = 38
c = 7
c = 10
c = 11
c = 64
c = 65
c = 66
c = 67
c = 71
c = 72
c = 73
c = 74
c = 84
c = 91
c = 93
c = 94
c = 96
c = 97
*1 Only when setting the appointed parameter with RPN, NRPN.
*2 Does not effect Rhythm Voice.
*3 MSB=0, anything other than 63 is 0.
• Until a PROGRAM CHANGE message is received, the BANK SELECT
operation will be suspended. When a Voice, including VOICE BANK, is
changed, set the BANK SELECT and Program Change Message, and
transmit in the following order, BANK SELECT MSB, LSB, PROGRAM
CHANGE.
• MODULATION controls the Vibrato Depth.
• PORTAMENTO TIME controls the Pitch Change Speed when the
Portamento Switch = ON. 0 being the shortest time, and 127 being the
longest.
• PANPOT changes the value for the melody voice and rhythm voice in
relation to the preset value.
• Portamento time is fixed to 0 when the PORTAMENTO CONTROL is
used.
• HARMONIC CONTENT applies adjustment to the resonance value that
is set by the voice. This parameter specifies relative change with the
value of 64 producing 0 adjustment. As values get higher the sound
becomes increasingly eccentric. Note that for some voices the effective
parameter range is narrower than the legal parameter range.
• RELEASE TIME applies adjustment to the envelope release time set by
the voice. This parameter specifies relative change with the value of 64
producing 0 adjustment.
1101nnnn (DnH) n = 0 - 15 VOICE CHANNEL NUMBER
0vvvvvvv v = 0 - 127 AFTER TOUCH VALUE
1110nnnn (EnH) n = 0 - 15 VOICE CHANNEL NUMBER
0vvvvvvv PITCH BEND CHANGE LSB
0vvvvvvv PITCH BEND CHANGE MSB
1011nnnn (BnH) n = 0 - 15 VOICE CHANNEL NUMBER
0vvvvvvv
BANK SELECT MSB ; v = 0:XG NORMAL,
64:SFX NORMAL,
126:XG SFX KIT,
127:XG DRUM
BANK SELECT LSB ; v = 0 - 127
DATA ENTRY MSB ; v = 0 - 127
DATA ENTRY LSB ; v = 0 - 127
MAIN VOLUME ; v = 0 - 127
PANPOT ; v = 0 - 127
EXPRESSION ; v = 0 - 127
SUSTAIN ; v = 0-63:OFF , 64-127:ON
SOSTENUTO ; v = 0-63:OFF , 64-127:ON
SOFT PEDAL ; v = 0-63:OFF , 64-127:ON
REVERB SEND LEVEL ; v = 0 - 127
VARIATION SEND LEVEL ; v = 0 - 127
BANK SELECT MSB ; v = 0:XG NORMAL,
64:SFX NORMAL,
126:XG SFX KIT,
127:XG DRUM
BANK SELECT LSB ; v = 0 - 127
MODULATION ; v = 0 - 127
PORTAMENTO TIME ; v = 0 - 127
DATA ENTRY MSB ; v = 0 - 127
DATA ENTRY LSB ; v = 0 - 127
MAIN VOLUME ; v = 0 - 127
PANPOT ; v = 0 - 127
EXPRESSION ; v = 0 - 127
SUSTAIN ; v = 0-63:OFF , 64-127:ON
PORTAMENTO ; v = 0-63:OFF , 64-127:ON
SOSTENUTO ; v = 0-63:OFF , 64-127:ON
SOFT PEDAL ; v = 0-63:OFF , 64-127:ON
HARMONIC CONTENT ; v = 0:-64 - 64:0 - 127:+63
RELEASE TIME ; v = 0:-64 - 64:0 - 127:+63
ATTACK TIME ; v = 0:-64 - 64:0 - 127:+63
BRIGHTNESS ; v = 0:-64 - 64:0 - 127:+63
PORTAMENT CONTROL ; v = 0 - 127
REVERB SEND LEVEL ; v = 0 - 127
CHORUS SEND LEVEL ; v = 0 - 127
VARIATION SEND LEVEL ; v = 0 - 127
(When only Connection = 1[System])
DATA INCREMENT ; v = 127
DATA DECREMENT ; v = 127
*3
*1
*1
*2
*2
*2
*3
*2
*2
*1
*1
*2
*2
*2
*2
*2
*2
*2
*2
*2
*1
*1
115