Seite 1
Claro / Campo II Umbauanleitung Abluftkanal Conversion instructions exhaust duct...
Seite 2
1. Klappe öffnen und mit Hilfsmittel auf 90° arretierten. 2. Filter herausnehmen 3. 4 Torx-Schrauben herausschrauben. 1. Open the flap and use a tool to lock it at 90 °. 2. Remove the filter 3. Unscrew the 4 Torx screws. 6.
Seite 3
10. Schraubenbolzenleisten herausnehmen 9. Motor mit Flansch herausnehmen 11. Mittig wiedereinsetzen ( gem. Abb. ) 9. Take out the motor with the flange 10. Remove the screw bolt strips 11. Reinstall in the middle (as shown in the illustration) 12. Abdeckblech abschrauben , heraus- nehmen und in seitlicher Öffnung einset- zen.
Seite 4
Energy label data and product datasheets can be viewed on our website at www.gutmann-exklusiv.eu. The reproduction, modifi- cation, utilisation and/or dissemination of the information published herein without prior, written authorisation having been provid-...