Inhaltsverzeichnis
Werbung
PPC S7
7.15.2 Running the Program
1. Boot the system from the bootable floppy diskette you created. Booting
from the diskette bypasses loading drivers from the CONFIG.SYS and
AUTOEXEC.BAT files on the hard drive, eliminating the possibility of
loading a program (e.g., a memory manager) that conflicts with the Award
flash utility.
NOTE:
The Award flash utility cannot run when EMM386 or QEMM
are loaded. If you try, an error message appears.
2. At the DOS command line, type awdflash and press Enter.
A screen similar to this appears:
Copyright 1996, Award Software International
For I430HX-2A59F000
Flash Type -
File Name to Program: ░░░░░░░░░░░░░░░░░░
3. The cursor should be opposite File Name to Program
4. Type the name of the new BIOS file (e.g., newbios.bin), and press Enter.
5. At the bottom of the menu, this prompt appears:
Do You Want to Save BIOS (Y/N)?
6. If you DO NOT wish to save the old BIOS, type N and press Enter. Then
move to step 8.
If you DO wish to save the old BIOS, respond Y, and press Enter.
7. In the File Name to Save field, type a file name for the old BIOS (for
example, oldbios.bin), and press Enter.
82
FLASH MEMORY WRITER v5.3x
Handbuch
DATE: 06/18/96
7.BIOS
Werbung
Inhaltsverzeichnis
