Inhaltsverzeichnis
Werbung
PPC S7
We recommend that you select type
The BIOS can automatically detect the specifications and optimal operating
mode of almost all IDE hard drives. When you select type
drive, the BIOS detects its specifications during POST, every time the system
boots.
Halt On
During the power-on self-test (POST), the computer stops if the BIOS detects a
hardware error. You can tell the BIOS to ignore certain errors during POST
and continue the boot-up process. These are the selections:
No errors
All errors
All,
But Keyboard
All, But Diskette
All, But Disk/Key
Memory
You cannot change any values in the Memory fields; they are only for your
information. The fields show the total installed random access memory (RAM)
and amounts allocated to base memory, extended memory, and other (high)
memory. RAM is counted in kilobytes (KB: approximately one thousand
bytes) and megabytes (MB: approximately one million bytes).
RAM is the computer's working memory, where the computer stores programs
and data currently being used, so they are accessible to the CPU. Modern
personal computers may contain up to 64 MB, 128 MB, or more.
•
Base Memory
Typically 640 KB. Also called conventional memory. The DOS operating
system and conventional applications use this area.
•
Extended Memory
Above the 1-MB boundary. Early IBM personal computers could not use
memory above 1 MB, but current PCs and their software can use extended
memory.
64
POST does not stop for any errors.
If the BIOS detects any non-fatal error, POST
stops and prompts you to take corrective
action.
POST does not stop for a keyboard error, but
stops for all other errors.
POST does not stop for diskette drive errors,
but stops for all other errors.
POST does not stop for a keyboard or disk
error, but stops for all other errors.
Handbuch
for all drives.
AUTO
for a hard
AUTO
7.BIOS
Werbung
Inhaltsverzeichnis
