Inhaltsverzeichnis
Werbung
PPC S7
7.BIOS
7.5 In Case of Problems
If, after making and saving system changes with Setup, you discover that your
computer no longer is able to boot, the EliteBIOS supports an override to the
CMOS settings that resets your system to its default configuration.
You can invoke this override by immediately pressing <Insert> when you
restart your computer. You can restart by either using the ON/OFF switch, the
RESET button or by pressing <Ctrl>, <Alt> and <Delete> at the same time.
The best advice is to alter only settings that you thoroughly understand. In
particular, do not change settings in the Chipset screen without a good reason.
The Chipset defaults have been carefully chosen by Award Software or your
system manufacturer for the best performance and reliability.
Even a
seemingly small change to the Chipset setup may causing the system to become
unstable.
7.6 Setup Variations
Not all systems have the same Setup. While the basic look and function of the
Setup program remains the same for all systems, the appearance of your Setup
screens may differ from the screens shown here. Each system design and
chipset combination require custom configurations.
In addition, the final
appearance of the Setup program depends on your system designer. Your
system designer can decide that certain items should not be available for user
configuration and remove them from the Setup program.
7.7 SETUP: MAIN MENU
When you enter the EliteBIOS CMOS Setup Utility, a Main Menu, similar to
the one shown below, appears on the screen. The Main Menu allows you to
select from several Setup functions and two exit choices. Use the arrow keys to
select among the items and press ↵ to accept and enter the sub-menu.
The setup items MAIN Menue are:
Handbuch
59
Werbung
Inhaltsverzeichnis
