Inhaltsverzeichnis
Werbung
PPC S7
7.BIOS
computers usually load the operating system from the hard drive, and may even
load it from a CD-ROM drive.
Swap Floppy Drive
This field is effective only in systems with two floppy drives. Selecting
Enabled assigns physical drive B to logical drive A, and physical drive A to
logical drive B.
Boot Up Floppy Seek
When Enabled, the BIOS tests (seeks) floppy drives to determine whether they
have 40 or 80 tracks. Only 360-KB floppy drives have 40 tracks; drives with
720 KB, 1.2 MB, and 1.44 MB capacity all have 80 tracks. Because very few
modern PCs have 40-track floppy drives, we recommend that you set this field
to Disabled to save time.
Boot Up NumLock Status
Toggle between On or Off to control the state of the NumLock key when the
system boots.
When toggled On, the numeric keypad generates numbers
instead of controlling cursor operations.
Typematic Rate Setting
When Disabled, the following two items (Typematic Rate and Typematic
Delay) are irrelevant. Keystrokes repeat at a rate determined by the keyboard
controller in your system.
When Enabled, you can select a typematic rate and typematic delay.
Typematic Rate (Chars/Sec)
When the typematic rate setting is enabled, you can select a typematic rate (the
rate at which character repeats when you hold down a key) of 6, 8, 10,12, 15,
20, 24 or 30 characters per second.
Handbuch
68
Werbung
Inhaltsverzeichnis
