Inhaltsverzeichnis
Werbung
PPC S7
7.10 SETUP: CHIPSET FEATURES
*
*
*
*
Auto Configuration
Auto Configuration selects predetermined optimal values of chipset parameters.
When Disabled, chipset parameters revert to setup information stored in
CMOS. Many fields in this screen are not available when Auto Configuration
is Enabled.
AT Clock
Fixed set to 7,16MHz
DRAM Timing
The value in this field depends on performance parameters of the installed
memory chips (DRAM). Do not change the value from the factory setting
unless you install new memory that has a different performance rating than the
original DRAMs.
70
The setup items (*changeable) are:
Auto-Configuration
AT Bus Clock
L2 TAG RAM Size
DRAM Timing
SDRAM CAS Latency
Pipelined Function
Graphics Aperature Size
DRAM Data Integrity Mode
Memory Hole At 15-16MB
Host Read DRAM Command Mode
AGP Read Burst
ISA Line Buffer
Passive Release
Delay Transition
Primary Frame Buffer
VGA Frame Buffer
Data Merge
IO Recovery Periode
Auto Detect DIMM/PCI Clk
Spread Spectrum
Handbuch
7.BIOS
Werbung
Inhaltsverzeichnis
