Power Management Setup - Beckhoff CB2051 Handbuch

Kapitel: BIOS-Einstellungen

4.7 Power Management Setup

ACPI Function
ACPI Suspend Type
Run VGABIOS if S3 Resume
Power Management
Video Off Method
Video Off in Suspend
Suspend Type
Modem Use IRQ
Suspend Mode
HDD Power Down
Soft-Off by PWR-BTTN
PWRON After PWR-Fail
Wake-Up by PCI card
Power On by Ring
x USB KB Wake-Up From S3
Resume by Alarm
x Date(of Month) Alarm
x Time(hh:mm:ss)
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
 ACPI function
Optionen: Enabled / Disabled
 ACPI Suspend Type
Optionen: S1(POS) / S3(STR) / S1&S3
 Run VGABIOS if S3 Resume
Optionen: Auto / Yes / No
 Power Management
Optionen: User Define / Min Saving / Max Saving
 Video Off Method
Optionen: Blank Screen / V/H SYNC+Blank / DPMS
 Video Off In Suspend
Optionen: No / Yes
 Suspend Type
Optionen: Stop Grant / PwrOn Suspend
 MODEM Use IRQ
Optionen: NA / 3 / 4 / 5 / 7 / 9 / 10 / 11
 Suspend Mode
Optionen: Disabled / 1 Min / 2 Min / 4 Min / 8 Min / 12 Min / 20 Min / 30 Min / 40 Min / 1 Hour
 HDD Power Down
Optionen: Disabled / 1 Min ... 15 Min
 Soft-Off by PWR-BTTN
Optionen: Instant-Off / Delay 4 Sec
 PWRON After PWR-Fail
Optionen: Former Sts / On / Off
Seite 60
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
[Enabled]
[S1(POS)]
Yes
[User Define]
[DPMS]
[Yes]
[Stop Grant]
[3]
[Disabled]
[Disabled]
[Instant-Off]
[On]
[Disabled]
[Disabled]
Disabled
[Disabled]
0
0 : 0 : 0
Beckhoff New Automation Technology CB2051
Power Management Setup
Item Help