Yamaha DM 1000 Bedienungsanleitung Seite 364

364
Anhang C: MIDI
result HH
0eeeeeee ee
result HL
0eeeeeee ee
result LH
0eeeeeee ee
result LL
0eeeeeee ee
End of exclusive
EOX 11110111 F7
2.12.3.13 Parameter change
Reception
When this is received, the title of the specified memory/library will be changed.
If this is received from Studio Manager or Cascade Link, the operation will be
executed, and then the result of execution will be transmitted as a parameter re-
sponse.
Transmission
In response to a request, this is transmitted with the device number set to the
[Tx CH].
When the title is changed on the DM1000, this message will be transmitted with
the device number set to [Tx CH].
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010000 10
title
0100ffff 4f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
title 1
DATA 0ddddddd dd
:
: :
title x(depend on the library)
0ddddddd dd
End of exclusive
EOX 11110111 F7
function
SCENE LIB TITLE 0x40
EQ LIB TITLE 0x41
GATE LIB TITLE 0x42
COMP LIB TITLE 0x43
EFF LIB TITLE 0x44
CHANNEL LIB TITLE 0x46
INPATCH LIB TITLE 0x47
OUTPATCH LIB TITLE 0x48
Bus to Stereo LIB TITLE 0x49
Surround Monitor LIB TITLE 0x4A
AUTOMIX LIB TITLE 0x4B
2.12.3.14 Parameter request
Reception
When this is received, a parameter change will be transmitted with the device
number set to [Rx CH].
Refer to the above table for the Functions and Numbers.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010000 10
title
0100ffff 4f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
EOX 11110111 F7
2.12.3.15 Parameter change (Function call response: title)
Transmission
If the title is modified by a parameter change received from Studio Manager, the
result of execution will be transmitted as the following parameter change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 01010000 50
title
0100ffff 4f
DM1000—Bedienungsanleitung
(Function call: title)
number size
0-99,256(0:response only) 16
1-128(1-40:response only) 16
1-128(1-4:response only) 16
1-128(1-36:response only) 16
1-128(1-52:response only) 16
0-128(0:response only) 16
0-32(0:response only) 16
0-32(0:response only) 16
0-32(0:response only) 16
0-32(0:response only) 16
1-16 16
(Function call: title)
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
result HH
DATA 0eeeeeee ee
result HL
0eeeeeee ee
result LH
0eeeeeee ee
result LL
0eeeeeee ee
End of exclusive
EOX 11110111 F7
2.12.3.16 Parameter change (Function call: Scene/Library
Clear)
Reception
When this is received, the specified memory/library will be cleared. If this is re-
ceived from Studio Manager or Cascade Link, the operation will be executed,
and then the result of execution will be transmitted as the following parameter
response.
Transmission
When a memory or library is cleared on the DM1000, this message will be trans-
mitted with the device number set to [Tx CH].
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010000 10
clear function
0110ffff 6f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
EOX 11110111 F7
function
SCENE LIB CLEAR 0x60
EQ LIB CLEAR 0x61
GATE LIB CLEAR 0x62
COMP LIB CLEAR 0x63
EFF LIB CLEAR 0x64
CHANNEL LIB CLEAR 0x66
INPATCH LIB CLEAR 0x67
OUTPATCH LIB CLEAR 0x68
Bus to Stereo LIB CLEAR 0x69
Surround Monitor LIB CLEAR 0x6A
AUTOMIX LIB CLEAR 0x6B
2.12.3.17 Parameter change (Function call response:
Scene/Library Clear)
Transmission
When a scene or library is cleared as a result of receiving a parameter change
from Studio Manager, the result of execution will be transmitted as the follow-
ing parameter change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 01010000 50
clear function
0110ffff 6f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
result HH
DATA 0eeeeeee ee
result HL
0eeeeeee ee
result LH
0eeeeeee ee
result LL
0eeeeeee ee
End of exclusive
EOX 11110111 F7
2.12.3.18 Parameter change (Function call: attribute)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, the attribute of the specified memory/library will be
changed.
number
1-99
41-128
5-128
37-128
53-128
1-128
1-32
1-32
1-32
1-32
1-16