Electrolux WTSL4E201 Benutzerinformation Seite 25

11.1 NON-STOP programme
WARNING!
Do not put a plastic device/
ball for the detergent into the
drum.
1. Press button Ein/Aus - Marche/Arrêt
for some seconds to activate the
appliance .
2. Load the laundry one item at a time.
3. Put the detergent and the additives in
the appropriate compartment.
4. Turn the programme dial to the
washing programme. The display
shows the symbols of the different
washing phases.
5. Set the available options.
WARNING!
Do not set a spin speed
lower than the automatic
speed of the set programme.
11.2 Washing and Drying at
automatic levels
1. Press button Trockengrad - Niveau de
séchage repeatedly until the black line
appears under one of the dryness
level symbol.
The iron dry level
The cupboard dry level
The extra dry level
The drying symbol comes on.
The anti-crease symbol comes on.
The display shows that the appliance is
ready to start.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying the
appliance does not let you
set a too low spin speed for
the items to be washed and
dried.
2. Press button Start/Pause - Départ/
Pause to start the programme.
The set dryness level symbol stays
on (e.g. Cupboard dry). The others
level symbols go off.
The door locked symbol comes
on.
The display shows the new time value
each minute.
The last minutes of the drying
cycle the appliance performs
the anti-crease and the
cooling phases.
11.3 Washing and Timed drying
WARNING!
Do not put a plastic device/
ball for the detergent into the
drum.
1. Press button Trockenzeit - Minuterie
repeatedly to set the drying time value:
The drying symbol comes on.
The anti-crease symbol comes on.
The drying time symbol comes on.
The display shows the set drying value
time .
Set drying time value.
Each time you press this button the time
value increases by 5 minutes.
To have a good drying we
suggest you to do not set a
too low spin speed for the
items to be washed and
dried.
ENGLISH 25