Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installing CD-Writer Plus and Software
24. Plug your computer, monitor, and other devices into a wall outlet or
power strip, and turn ON your computer.
25. Insert Disc 1 into either the CD-ROM drive or the CD-Writer Plus. When
your computer starts, the CD-Writer Plus software will make sure that it is
communicating properly.
26. Software installation will automatically continue. Follow the instructions
on the screen to install the software you want.
If You Have Problems
Read and use the setting created by the Install Recommendation.
Can't find the IDE controller in your computer.
Check your computer's manual or call the manufacturer for assistance.
DO NOT ATTACH CD-WRITER PLUS TO A SOUND BOARD'S IDE
CONTROLLER.
Computer won't boot.
Turn your computer off and then back on.
With the computer off, double-check each cable's connector.
Straighten any bent pins, make sure all pins are covered by the
connector, and align the cable's colored stripe with PIN-1 of each
connector.
If you changed the order of the data cable's connectors on an IDE
device to make room for your CD Writer, replace the connector that
was originally on the device and attach the CD-Writer to a free
connector.
The CD-Writer Plus doesn't appear in My Computer or Explorer.
Turn your computer off and then back on.
Press the eject button to ensure the CD-Writer Plus drive has power?
Turn off and unplug your computer. Double-check each connector
along the data cable, straighten any bent pins, make sure all pins are
covered by the connector, and align the cable's colored stripe with
PIN-1 of each connector.
If you changed the order of the data cable's connectors on an IDE
device to make room for your CD Writer, replace the connector that
was originally on the device and attach the CD-Writer to a free
connector.
English-7
Werbung
