HP CD-Writer Plus 7570i Benutzerhandbuch Seite 24

Installing CD-Writer Plus and Software
Installing CD-Writer
Plus and Software
1. Insert the CD labeled Software Disc 1 into your CD-ROM drive (not the
CD-Writer Plus drive). The main menu should appear. If it does not
appear automatically, run SETUP from the installation disc.
2. Watch the installation video (about 6 minutes) by clicking on the Watch
Installation Video icon.
3. Get installation recommendations using the Install Assistant that came
on your installation disc.
Note: Install Assistant provides installation recommendations, but is not
required for installation.
If you have a CD-ROM, go to the main software setup menu and
click on the Install CD-Writer Plus icon.
If your computer does not have a CD-ROM drive: Create an Install
Assistant diskette from another computer's CD-ROM. Insert "Software
Disc 1" into the other computer's CD-ROM . From the main menu,
click Browse this CD, double-click the CopyDisk folder, double-click
Copydisk.exe, and select Install Assistant. Take this diskette to your
computer and insert it into the floppy drive. Run A:\ASSIST.
4. Follow the instructions on the screen.
5. When the CD-Writer Plus Install Recommendation screen appears, click
Print. Or, if you don't have a printer, copy the information and have it
available as you proceed through these instructions.
6. If you are replacing your CD-ROM drive, remove Software Disc 1 from
your CD-ROM drive.
Install CD-Writer Plus icon
English-1