Connecting The Speaker Cables; Connecting The Subwoofer - Yamaha DVX-S301 Bedienungsanleitung

■ Connecting the speaker cables

Connect the speaker cable with the color band to the plus
(Red (+)) connector on the front/center/surround speakers
and with the white line to the minus (Black (–)) connector.
Lever
(Black)
Press the lever down, then
insert the cable into the hole
and release the lever.
Lever
(Red)
Lever
(Black)
Press the lever down, then
insert the cable into the hole
and release the lever.

■ Connecting the subwoofer

Insert the cable plug of the speaker cable into the speaker
jack of the same color until you hear it click into place.
• FRONT R (Red), CENTER (Green), FRONT L
(White): Insert the cable plug facing the tub
upwards.
• SURROUND R (Gray), SURROUND L (Blue):
Insert the cable plug facing the tub downwards.
Red
Green
Tab
White
Blue
Gray
Tab
Color
band
Lever
(Red)
Color
band
NX-SW301
Before connecting the speaker cables to the subwoofer
(NX-SW300), remove the cable plugs from supplied
speaker cables.
Press and hold the release button and remove the supplied
speaker cable from the cable plug.
Note
Be sure to twist the cable core firmly in a clockwise
direction. Twisting loosely may cause a short.
Good
FRONT R (Red), CENTER (Green), FRONT L
(White):
SURROUND R (Gray), SURROUND L (Blue):
color
band
Lever
SPEAKERS
FRONT CENTER SURROUND
Lift up the lever, then insert
the cable into the hole and
replace the lever.
Note
Do not use excessive force when inserting the cable
plug. Doing so may damage the cable plug or speaker
jack.
SYSTEM CONNECTIONS
2
Release button
No Good
NX-SW300
17