Connecting An Already-Paired Component Via Bluetooth; Disconnecting A Bluetooth Connection - Yamaha ISX-B820 Restio Handbuch

Listening to a Bluetooth component
Top panel
AUTO
1
DIMMER
USB
VOLUME SOURCE ALARM
1

Connecting an already-paired component via Bluetooth

Once pairing has been completed, connecting a Bluetooth will be easy the next time.
 Connecting from this unit
Top panel
AUTO
1
DIMMER
USB
VOLUME SOURCE ALARM
1
Bluetooth indicator
 Connecting from the other component
1
In the Bluetooth settings of the other component, turn Bluetooth on.
2
From the Bluetooth connection list of the other component, choose this unit (ISX-B820 Yamaha).
The Bluetooth connection will be established, and the Bluetooth indicator on the front panel display of this unit will light.
Note
Bluetooth connections cannot be established from the other component when this unit is in power save mode. Turn the system on.

Disconnecting a Bluetooth connection

If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth connection will be disconnected.
• Hold down SOURCE button on this unit or Bluetooth on the remote control.
• Turn the system off.
• Turn off the Bluetooth setting of the other component.
y
When you connect an iPod touch/iPhone/iPad via Bluetooth, the Bluetooth connection may be disconnected if you switch the playback source to iPod while
another iPod is connected to the iPod dock.
2 SET 2 BEEP SOURCE + BEEP
1 SOURCE
CLOCK ALARM TYPE
LABEL SIDE
SNOOZE SLEEP PRESET
SOURCE + BEEP
2 SET 2 BEEP
1 SOURCE
CLOCK ALARM TYPE
LABEL SIDE
SNOOZE SLEEP PRESET
LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT
1
Press the SOURCE button to switch the playback
source to Bluetooth.
2
Connect this unit and your other component via
Bluetooth.
3
Play back music from your Bluetooth component.
Note
Take care that the volume setting of this unit is not too high. We
recommend that you adjust the volume on the other component.
y
• If you connect via Bluetooth from your other component and play
back music while this unit is turned off the system, this unit will
automatically turn on the system.
• If you disconnect the Bluetooth connection from your other
component while the playback source is set to Bluetooth, this unit
will automatically turn off the system.
• If Bluetooth is selected as the playback source, this unit will
automatically turn off the system when 60 minutes have elapsed
without any Bluetooth connection nor any operation performed.
1
Press the SOURCE button to switch the playback
source to Bluetooth.
The Bluetooth indicator will blink on the front panel display;
this unit will search for the other component that was most
recently connected via Bluetooth, and will then establish a
connection (You must first turn on the Bluetooth setting of the
other component).
When the Bluetooth connection has been established, the
Bluetooth indicator will light.
Note
Yamaha does not guarantee all connections between this unit and
Bluetooth component.
11
En