The Keypad; El" Screen Activation Setting - One Forall Kameleon 4 Bedienungsanleitung

1.
2.
3.
( )
4.
WWW.ONEFORALL.COM

The Keypad

IR (infra-red) Indicator
The IR Indicator animates when IR is being "sent" or
"received". The KAMELEON 4 animated IR Indicator will show
"outgoing IR" whenever a functional key is pressed. When
using the "Learning Procedure" the animated IR indicator will
show "incoming IR". The IR Indicator will give feedback when
keys are pressed both during normal use and in programming
mode (the bottom part of the IR indicator will blink).
Device keys
The TV, VCR, SAT/CBL and DVD keys select the device to be con-
trolled. For example pressing the TV key allows the remote to
control the functions of your Television, after pressing VCR you
can operate your Video Recorder, after pressing the SAT/CBL
key you can operate your Satellite Receiver or Cable Converter
etc. (see page 8 for more details). After pressing a device
(mode) key on your KAMELEON 4 the applicable device icon
will light up, to show the currently activated mode. Pressing
the device key will allow you to return to the main screen (TV,
VCR, SAT/CBL modes).
POWER (in shifted mode; Sleeptimer)
The POWER key controls the same function as on your original
remote. In shifted mode (accessed by pressing MAGIC shortly
and releasing it) the POWER key becomes the Sleeptimer
function (see page 17).
"EL" panel with animated screens
This product features an "EL" panel (Electro Luminescence
technology) which is motion activated. In order to save battery
life, the "EL" screen will stay illuminated for 10 seconds during
normal use. It is also possible to change the motion activation-
mode into activation by keypress. To change the activation-
mode, see below section: "EL" screen activation setting. It is
also possible to increase or decrease the brightness on the
KAMELEON 4 "EL" panel (see page 5). One of the key features
of the KAMELEON 4 is the "EL" display, which changes to suit
the device you are controlling. The overview on page 4 will
show you all the possible screens and the functions that you
will obtain.

"EL" Screen activation setting

The KAMELEON 4 features an "EL" panel which is motion
activated or keypress activated depending on the current
setting.
To change the activation setting:
1. Press and hold the MAGIC key until the
rabbit comes out of the hat.
2. Press 9 8 9.
-> If the bottom part of the animated IR Indicator blinks
twice the "EL" panel will be motion activated.
-> If the bottom part of the animated IR Indicator blinks four
times the "EL" panel will be activated by keypress.
Simply perform these steps to lock the KAMELEON 4
to the activation setting that you prefer.
3