One Forall Kameleon 4 Bedienungsanleitung Seite 20

- Each MACRO can consist of a maximum of 15 keystrokes.
- To include a function from a particular screen in a mode, use the SCREEN
key.
- Make sure that you program a Macro on a spare key that you don't use in
any mode.
- Once you program a Macro on a specific key, the sequence will work
regardless of the mode (TV, VCR, SAT/CBL or DVD) you are using. This means
that the function picked on that specific key will be sacrificed.
- To avoid accidental recordings with the KAMELEON 4, you must press the
RECORD key twice to begin recording. Please note that if you assign a
Macro or Shifted Macro on the RECORD key this will deactivate the double
key press. Therefore we recommend not to assign a Macro to this key.
- If you had to hold down a key for a few seconds on the original remote
control to get a function, this function may not work in a macro on your
KAMELEON 4 remote.
- Keys such as (TV) menu, (VCR) menu etc. will not change screen when
pressed during Macro programming.
- Upon changing the batteries your Macros will be retained.
- If you program a Macro on a key, the original function will become shifted
(excluding POWER, CH+/- and VOL+/- keys). Press MAGIC then the key to
access it. If you place a Macro shifted on a digit key, access the original
function by pressing MAGIC twice and then the digit key.
- You can replace a Macro by placing another Macro on top.
Shifted Macros
It is also possible to place a shifted Macro on a key to maintain
the original function.
Example: To set up a Shifted Macro that switches off your TV, VCR and SAT/CBL
on the "red" key on your KAMELEON 4: (so that you will keep the original
function on that key).
MAGIC* 9 9 5
SAT/CBL, POWER"
Now every time you press "MAGIC", then the "red key", the KAMELEON 4 will
turn off your TV, VCR and Satellite.
- If a Shifted Macro is placed on the POWER, CH+/- or VOL+/- keys, the
Sleeptimer and Colour/Brightness features will be sacrificed.
To erase a (direct) Macro
Example: To erase the Macro from the "MACRO" key, press:
MAGIC* 9 9 5
To erase a (shifted) Macro
Example: To erase the Shifted Macro from the "red key" press:
MAGIC* 9 9 5
(*) Hold down the MAGIC key until the rabbit comes out of the hat.
(**) Hold down MAGIC until the IR Indicator will blink twice and the
rabbit will disappear.
WWW.ONEFORALL.COM
Extra Features
MAGIC "red key"
MAGIC**
"MACRO" MAGIC**
MAGIC "red key"
"TV, POWER, VCR, POWER,
MAGIC**
19