About Your Kameleon 4; Batteries - One Forall Kameleon 4 Bedienungsanleitung

Your ONE FOR ALL KAMELEON 4 package contains:
- Your KAMELEON 4 universal remote control.
- Your KAMELEON 4 manual.
Your KAMELEON 4 manual is divided into two parts:
- "Set-Up Instructions".
- "Device Codes".
You will need this manual to set up your new KAMELEON 4 so please
be sure to keep it.
Easy to use unique "EL" display
By choosing the ONE FOR ALL KAMELEON 4 universal remote control you have
opted for easy use. Your KAMELEON 4 features a unique, user-friendly backlit
display, which ensures you have easy access to all the keys you need, whilst
hiding those you don't. Made of the strictest quality, it will provide long-term
satisfaction. When replacing batteries, you will need to first press any key before
the screen will light up. From then on, the display will automatically illuminate
whenever the remote is picked up or moved. It is also possible to change the
activation-mode into activation by keypress. To set the "EL" display to activation
by keypress, see page 3, section: "EL" screen activation setting.
Controls up to 4 devices
Your KAMELEON 4 is designed to let you use one remote to operate four devices
(a television, satellite receiver / cable box, video recorder, DVD player) designed
to be operated by an infrared signal. Your KAMELEON 4 comes with 2 IR (infra-
red) wide range transmitters for maximum range and is High Frequency capable
up to 450 kHz.
Learning feature
The KAMELEON 4 comes equipped with the unique "learning feature", which
means that you can copy almost any function (max. ± 30) from your original
(working) remote control onto your new KAMELEON 4 (See "Learning Feature"
on page 11). This comes in handy, when after having setup your KAMELEON 4
you may find some functions from your original remote missing on your
KAMELEON 4 key pad.
Macros (sequence of commands)
Your KAMELEON 4 comes with an easy-to-use Macro feature, allowing you to
send several commands with the press of a single key (for example turning a few
devices on or off). You can use the MACRO key for this feature. Once you
programmed a macro on the MACRO key, the sequence will be performed in
every mode.
Your KAMELEON 4 comes with 4 AAA/LR03 alkaline batteries.
1. Push the battery door upwards and lift it up to remove it.
2. Match the batteries to the (+) and (–) marks inside the battery case, then
insert the batteries.
3. Replace the battery cover by pushing downwards and allowing it to click
back into position.
- After re-installing the batteries, the entire "EL" display will be lit for a
duration of 6 seconds upon the first keypress after which it will default to
the TV mode.
2

About Your KAMELEON 4

Batteries

WWW.ONEFORALL.COM