Colour & Brightness; Channel +/- Simulation - One Forall Kameleon 4 Bedienungsanleitung

Depending on the functions of your original remote control, the KAMELEON 4
can operate the colour and brightness settings of your Television.
To adjust the colour:
Press the MAGIC key followed by Volume + (for colour +) or Volume -
(for colour -).
To adjust the brightness:
Press the MAGIC key followed by Channel + (for brightness +) or
Channel - (for brightness -).
Depending on how you used colour and brightness on the original remote, you
may need to access colour and brightness in a different way (through menu for
example).
If your original TV, VCR, SAT/CBL or DVD remote control does not have any
channel +/- keys, your KAMELEON 4 can simulate this function.
Example: to program "Channel +/- Simulation" in TV mode.
1. Press TV once.
2. Press and hold the MAGIC key until the rabbit comes out of the hat.
3. Press 9 7 1. The bottom part of the animated IR Indicator will light up
twice.
The original channel +/- function of your TV (if present) on the CH+/- key will
now be sacrificed.
Example: to cancel the "Channel +/- Simulation" in TV mode:
1. Press TV once.
2. Press and hold the MAGIC key until the rabbit comes out of the hat.
3. Press 9 7 1. The bottom part of the animated IR Indicator will blink four
times.
The CH+/- function of your TV (if present) will now be restored.
- The Channel +/- simulation will be limited to: (1 – 9, 0).
- It is only possible to switch Channel +/- simulation on for one mode at a
time.
WWW.ONEFORALL.COM
Extra Features
Colour & Brightness

Channel +/- simulation

15