Search Method - One Forall Kameleon 4 Bedienungsanleitung

Setting up the KAMELEON 4
--> If your device does not respond to the KAMELEON 4 after you have tried
all the codes listed for your brand.
--> If your brand is not listed at all.
The Search Method allows you to scan through all the codes contained in the
memory of the KAMELEON 4.
Example: To search for your TV code:
1
2
3
4
5
6
7
8
9
- During step 5, instead of POWER you can also press 0,1, 2, 3, VOL+, PLAY,
STOP or MUTE. This will be the function sent for the next key presses of CH+
or CH- in step 6. If for example; during step 5, you press "2" instead of
"POWER", the KAMELEON 4 will send the "number 2" signal every time you
press CH+ during step 6 (make sure your TV is switched to another channel).
- During step 6, while searching you can sample any of the following keys 0,
1, 2, 3, VOL+, PLAY, STOP, MUTE and thereafter continue the search (CH+ on
CH-) with the last function sampled. Pressing CH+ will send the signal from
the next code contained in the memory. Pressing CH- will send the signal
from the previous code. This can be useful if you missed the code while
searching (reversed search).
- To search for your other devices, follow the same instructions above, only
press the appropriate device key during step 2.
- If your Video's original remote control does not have a POWER key, press
PLAY instead of POWER during step 5.
WWW.ONEFORALL.COM

Search Method

Switch ON your Television (not on standby).
Press the TV key on your KAMELEON 4.
Press and hold down the MAGIC key (for about
3 seconds) until the rabbit comes out of the hat.
Press 9 9 1, the bottom part of the animated
IR Indicator will light up twice.
Next, press POWER.
Point the KAMELEON 4 at your Television. Now press CH+
over and over, until your Television turns off (every time
you press the CH+ key the KAMELEON 4 will send out a POWER
signal from the next code contained in the memory). You may
have to press CH+ many times (up to 150 times) so
please be patient. Remember to keep pointing the
KAMELEON 4 at your Television while pressing this key.
(If you skip past a code, you can go to the previous code(s) by
pressing the CH - key.)
When your Television switches off, press the
MAGIC key to store the Code. The bottom part
of the animated IR Indicator will light up twice. Now your
KAMELEON 4 should be ready to control your television.
Turn your device (television) back on and try all the remote's
functions to ensure they are working properly.
If you cannot control your Television properly, please continue
the Search Method, you may be using the wrong Code.
9