After Navigating; Erasing Waypoints And Route; General Information - Flytec Element Handbuch

English

2.3 After navigating

Erasing waypoints and route

The route will remain in active mode until you deactivate it, even if you
switch off your Element. You cannot edit the route until you deactivate it.
Press and hold . Deactivate Route
Your waypoints list and route are stored separately in the device's memory. Therefore,
deleting the route will not erase the waypoints from your stored waypoints list.
Similarly, deleting individual waypoints from your waypoints list will not remove them
from a saved route.
To delete a route:
, then select Route. Press
Press and hold
to select Delete. Press
Use the arrow keys
You will see the prompt Delete route? Press
The route will be erased, but your Element will retain the waypoints in its list.
Erasing waypoints is easy. To erase waypoint HouseThermal:
Press and hold , then use the arrow keys
Waypoints. Press
.
Select Edit and press
.
Use the arrow keys to select HouseThermal.
Press to delete.
Your waypoint HouseThermal has been deleted from the waypoints list. If your saved
route includes HouseThermal, the route will still contain this waypoint.
16 Navigation
by pressing .
.
.
.
to select

3. General information

Firmware update
Flytec will also issue firmware updates from time to time to improve your
Element's performance and to update you with new features, such as
airspace support. These will be easy to install, drag-and-drop files just like your
tracks. Check the Flytec Element product page for the latest firmware and news about
your Element.
Changing language
At the moment the Element ships with three firmware editions for German,
French, and English ready for installation in the update folder. The stored
firmware versions end in ._pg and to activate another language, simply rename the
file ending to .upg. For future language changes, just download the newest firmware
in your preferred language and drop it into the update folder.
Batteries
If you choose to power your Element with NiMH rechargeable batteries, it is
important to configure the power supply setting on the device.
Press and hold , then use the arrow keys
Instrument settings. Press .
Select Battery type and press .
Use the arrow keys to select NiMH. Press
Press to return to the Main Setup Menu.
Never remove the batteries until you first switch off your Element. We do not
recommend using NiCad rechargeable batteries.
Do not keep your Element plugged into the computer for a prolonged time after
exchanging files with it. Keeping it plugged in drains the instrument's battery.
English
to select
.
General information 17