First Flight; Get Ready For The First Flight; Switching On; Gps Acquisition - Flytec Element Handbuch

English

1. First flight

1.1 Get ready for the first flight

Switching on

The Element comes with two AA alkaline batteries with which the device
will operate for about 30 hours.
Press the On/Off key .
Confirm On? by pressing .

GPS acquisition

Give your Element at least 2 minutes with an unobstructed view of the sky
to acquire a GPS signal. GPS 3D will appear at the top of the display screen
when the device receives sufficient satellite reception. Battery charge state is also
indicated.
Your radio and mobile phone will interfere with GPS reception, so keep them
away from your Element.

Set time zone

Time and date are automatically set by GPS, but you will need to input
your time zone.
Press and hold , then use the arrow keys
Instrument settings. Press .
Select Time zone and press .
Use the arrow keys to choose your UTC (World Time) offset.
Press .
Press to return to the Main Setup Menu.
4 First flight
to select

Choose units

You should also choose which units of measurement you would like your
Element to display. Metric or imperial units, Fahrenheit or Celsius scale, and
other choices are located in the Instrument Settings menu.
Press and hold , then use the arrow keys
Instrument settings. Press .
Use the arrow keys to select Units. Press
Use the arrow keys to select the unit to be changed. Press
Now use the arrow keys to select your unit preference.
Press .
Press to return to the Main Setup Menu.
English
to select
.
.
First flight 5