Skipping A Waypoint; Goto Function - Flytec Element Handbuch

English
In the example flight, this paraglider has just taken off from waypoint Niederhorn.
The compass rose will automatically point the way to HouseThermal. After passing
over waypoint HouseThermal, the compass rose will point toward waypoint Interlaken.
HouseThermal
Niederhorn
14 Navigation
The main arrow shows the
direction to waypoint
HouseThermal. The pilot must
veer to the right.
Interlaken
The blinking arrow shows the
pilot his next turn by indicating
that waypoint Interlaken is
located off the right wingtip.

Skipping a waypoint

A useful option is to skip forward or backward within an active route.
Imagine you have just taken off from Niederhorn. Now you decide to skip
HouseThermal and instead navigate directly to your landing field at Interlaken.
Press and hold .
to select Interlaken. Press
Use the arrow keys
You will now be guided to the waypoint you have selected and the active route will
continue from there.

Goto function

Another useful option is to use the Goto function to navigate to any stored
waypoint at any time. The Goto function supersedes an active route, but the
route is still active in the background. When you cancel the Goto function, your
Element will resume guiding you to the next waypoint on your route.
Imagine you have passed HouseThermal but decide to use Goto to navigate back to
Niederhorn for a top landing.
Press and hold . Activate Goto – by pressing
Use the arrow keys to select Niederhorn. Press
The arrow in the compass rose will now point you to Niederhorn.
Then, however, you decide to cancel the Goto function.
. Deactivate Goto
Press and hold
The arrow in the compass rose will resume pointing you to Interlaken.
English
.
.
.
by pressing .
Navigation 15