Speaker Setting; Switching Display - Kenwood KRC-591 Bedienungsanleitung

Volume offset "V-OFF"
Volume offset: Each source's volume can be set as a difference
from the basic volume.
5
Exit Audio Control mode
Press the [AUD] button.

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [Q] button.
–8 — ±0
Display
"SP OFF"
"SP 5/4"
"SP 6*9/6"
"SP OEM"
— 7 —

Switching Display

Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information
Program Service name or Frequency
Radio text
Clock
Displaying the frequency during Program Service name
reception
Press the [DISP] button for at least 1 second.
The frequency for the RDS station will be displayed for 5
seconds instead of the Program Service name.
In Tape source
Information
Play side
Tape running
Clock
In External disc source
Information
Track number (KRC-691)
Track number & Track Time
(KRC-591V/591)
Disc name
Disc title
Track title
Track number & Track Time (KRC-691)
Clock
Display
"R-TEXT"
Display
"DNPS"
"D-TITLE"
"T-TITLE"