Other Functions; Activating Security Code; Deactivating Security Code - Kenwood KDC-UI700RN Bedienungsanleitung

Other Functions

Activating Security Code

When Security Code is set, possibility of theft
is reduced because input of Security Code is
prompted to turn on the unit once it is turned off.
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1
Select Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Menu mode
Press the Search button for at least 1 second.
"MENU" is displayed.
3
Select Security Code mode
Press the [FM+] or [AM–] button.
Select the "CODE SET" display.
4
Enter Security Code mode
Press the [AUD] knob for at least 1 second.
When "ENTER" is displayed, "CODE" is also displayed.
5
Enter Security Code
Operation type
Select the digits to enter
Select the Security Code
numbers
6
Confirm the Security Code
Press the [AUD] knob for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is also
displayed.
7
Do the step 5 through 6 operation, and reenter
the Security Code.
"APPROVED" is displayed.
The Security Code function activates.
⁄
• If you enter the wrong Code in steps 5 through 6, repeat
from step 5.
• When the Security Code function is activated, "CODE
SET" changes to "CODE CLR".
• To deactivate the Security Code function, see the next
section <Deactivating Security Code>.
8
Exit Security Code mode
Press the Search button.
14
|
KDC-W4544U/ KDC-W4644U/ KDC-W4044U/ KDC-W413U
Operation
Press the [4] or [¢] button.
Press the [FM+] or [AM–] button.
Entering Security Code
The Security Code is required to use the audio unit
when the unit is first used after removed from the
battery power source or the Reset button is pressed.
1
Turn the power ON.
2
Do the step 5 through 6 operation, and enter
the Security Code.
"APPROVED" is displayed.
Now, you can use the unit.

Deactivating Security Code

To deactivate the Security Code function.
1
Select Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Menu mode
Press the Search button for at least 1 second.
"MENU" is displayed.
3
Select Security Code mode
Press the [FM+] or [AM–] button.
Select the "CODE CLR" display.
4
Enter Security Code mode
Press the [AUD] knob for at least 1 second.
When "ENTER" is displayed, "CODE CLR" is also
displayed.
5
Enter Security Code
Operation type
Select the digits to enter
Select the Security Code
numbers
6
Press the [AUD] knob for at least 3 seconds.
"CLEAR" is displayed.
The Security Code function deactivates.
7
Exit Security Code mode
Press the Search button.
⁄
• If a wrong security code is entered, "ERROR" is displayed.
Enter a correct security code.
Operation
Press the [4] or [¢] button.
Press the [FM+] or [AM–] button.