Appendix D, Modbus Tcp Information; Data From Pluto - ABB GATE-P1 Originalbetriebsanleitung

D Appendix D, Modbus TCP Information
The Modbus TCP server is running on the standard port number 502.
The server will respond on the following "slave address" or "Unit Identifier number".
Slave address or
Unit Identifier
1 (0x01)
2 (0x02)
3 (0x03)
4 (0x04)
33 (0x21)
34 (0x22)
35 (0x23)
The access rules are,
Access Rule
read
write
D.1 Data from Pluto
Modbus TCP slave address 33, (0x21), for read node status and combined data from each Pluto.
Note: Only 100 words can be read in one request!
If more data is needed divide them in two or more request with selected start/end address in the
request. For example a request with start 1 and end 66 will give node status and Pluto global data.
A request with start 67 and end 130 will give additional data.
Address Data Name
1 Node Status
3 PLUTO 00
5 PLUTO 01
7 PLUTO 02
9 PLUTO 03
11 PLUTO 04
13 PLUTO 05
15 PLUTO 06
17 PLUTO 07
19 PLUTO 08
21 PLUTO 09
23 PLUTO 10
25 PLUTO 11
27 PLUTO 12
29 PLUTO 13
31 PLUTO 14
33 PLUTO 15
35 PLUTO 16
37 PLUTO 17
39 PLUTO 18
41 PLUTO 19
43 PLUTO 20
45 PLUTO 21
Data
Data to Pluto
Local Data Request
Serial Pass through Request
Gateway Configuration

Data from Pluto

Local Data Response
Serial Pass through Response
Modbus TCP function
03 (0x03) Read Holding Register
16 (0x10) Preset Multiple Registers
127
Access
Rule
read/write
read/write
read/write
write
read
read/write
read/write
Data Type Addr + 0
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
UDINT MSW
Addr + 1
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
LSW
2TLC172009M0110_D