ABB GATE-P1 Originalbetriebsanleitung Seite 102

Input Instance 102 – 260 Bytes (Node Status and Data)
For more information about data structure see chapter 6.5.1.
Bytes Class, Instance, Attribute
0 – 3 0x64, 0x00, 0x0B
4 – 7 0x64, 0x01, 0x04
8 – 11 0x64, 0x02, 0x04
...
124 – 127 0x64, 0x1F, 0x04
128 – 131 0x64, 0x20, 0x04
132 – 135 0x64, 0x01, 0x0A
136 – 139 0x64, 0x02, 0x0A
...
252 – 255 0x64, 0x1F, 0x0A
256 – 259 0x64, 0x20, 0x0A
Output Instance Attributes (Instance 112)
Attribute Name
ID
3 Output Data
Output Instance 112 – 24 Bytes (Data to Pluto)
For more information about data structure see chapter 6.5.2.
Bytes Class, Instance, Attribute
0 – 5 0x64, 0x00, 0x0C
6 – 11 0x64, 0x00, 0x0D
12 – 17 0x64, 0x00, 0x0E
18 – 23 0x64, 0x00, 0x0F
Output Instance 128 (Heartbeat Instance – Input Only)
This instance allows client to monitor input data without providing output data.
Output Instance 129 (Heartbeat Instance – Listen Only)
This instance allows client to monitor input data without providing output data. To utilize this
connection type, an owning connection must exist from a second client and the configuration of the
connection must match exactly.
Output Instance 130 (Configuration Instance)
This instance allows client to download necessary configuration information to the gateway when
the I/O connection is opened. The configuration instance supports 0 – 400 bytes of data. If no
configuration data is needed this instance may be omitted.
Description
Node Status
Combined 32 Bit Data – Node 0
Combined 32 Bit Data – Node 1
Combined 32 Bit Data – Node 30
Combined 32 Bit Data – Node 31
Additional Data 00
Additional Data 01
Additional Data 30
Additional Data 31
Data Type
USINT
[0-24]
Description
Data to Pluto area 0
Data to Pluto area 1
Data to Pluto area 2
Data to Pluto area 3
102
Default Access
Data Value Rule
0 Get
2TLC172009M0110_D