Maintenance - Klarstein 10018902 Gebrauchsanleitung

1. Always remove the plug from the socket-outlet and allow the fan blower to stop acting before clean it.
2. Clean the external surfaces of the unit with a soft damp (not dripping wet) cloth.
WARNING:
• Do not immerse the unit in water.
• Do not use any cleaning chemicals such as detergents and abrasives.
• Do not allow the interior (special for the PCB) to get wet as this could create a hazard.
3. After extended periods of use, be sure to replace the water in the tank with fresh clean water at least
weekly. Also remember to clean the filter by unscrewing the filter and removing the filter cradle. It should
be cleaned in a mild soapy solution and then left to dry before replacing the filter.
4. When the unit is not in use, make sure that it is unplugged from the wall socket, water is drained
thoroughly and it is placed back into its original box for storage until later use.
5. In case of malfunction or doubt, do not try to repair the fan yourself, it may result in a fire hazard or
electric shock.
CHAL-TEC Vertriebs- + Handels GmbH; Wallstraße 16; 10179 Berlin, Germany

MAINTENANCE

10