effeff 1338-14 Installationsanleitung Seite 61

Simultaneous rotary switch setting S3 --> 0 and S2 --> 0 is not admissible
Example: You wish to set emergency exit address 58 at the emergency exit terminal. For this, the
rotary switch S3 for the address must be moved to position 3. This setting corresponds to the
address range 48-63. Starting from address 48, the difference to the required address 58, in this
case 10, must be set using the rotary switch S2 for the individual addresses. This is achieved by
moving the rotary switch S2 to position A.
For further information on the installation and on the selection of cables, please read the
operating instructions for the bus control panel 925.
D00135 Seite 61
09