Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USA
GB
28002
Rügen Steam Loco, 53 Mh
THE PROTOTYPE
Between 1913 and 1925, the Vul-
can Locomotive Works built three
locomotives for the Rügenschen
Kleinbahnen (Rügen Local Rail-
ways) on the Baltic island of
Rügen, where they operated as
51 Mh through 53 Mh. Powerful,
rugged and reliable, two of these
locomotives continue to pull pas-
senger trains through the picture-
sque fields and forests of Rügen.
THE MODEL
This detailed replica features:
- weather-resistant construction
- opening cab doors
- four-way power control switch
- protected gearbox with seven-
pole Bühler motor
- eight powered wheels
- one traction tire
- eight power pickups
- digital electronic sound:
- synchronized steam chuffs
- bell and whistle sounds
- brake sounds (with Multi-Train
System)
- air pump, safety valve and
steam sounds
- coal shoveling sound (with Multi-
Train System)
- announcement of conductor
(with Multi-Train System)
- volume control
- remote control of sound features
(with Multi-Train System)
- voltage stabilization circuit
- smoke generator
- automatic directional lanterns
- one multi-purpose socket
- length: 355 mm (14.0 in)
- weight: 3700 g (8.2 lb)
THE PROGRAM
With this model, we recommend
the following items:
31065 DR Passenger Car
901-204
38074 DR Passenger Car
901-202
42390 DR Fakultative Combine
8
42610 DR Low-Side Gondolas,
2 pieces
45690 DR
Flatcars,
2 pieces
47350 DR Seafood Transport Car
For information on the complete
LGB program, see the LGB cata-
log.
OPERATION
Preparation
Attention! To prevent staining
during shipping, the external drive
linkages on your new LGB loco-
motive were not lubricated at the
factory. For best operation, lubri-
cate the drive linkages including
sliding surfaces, valve guides and
drive rod ends with a small amo-
unt of LGB Maintenance Oil
(50019). A small supply of LGB
Oil (yellow) is included.
Operating Modes
This model has a four-way power
control switch mounted inside the
cab (Fig. 1, 2):
Position 0: All power off
Position 1: Power to lights and
smoke generator
Position 2: Power to lights, smoke
generator and motor
Position 3: Power to lights, smoke
generator, motor and
sound (factory pre-set)
Multi-Train System
This model has a direct decoder
interface. It can be equipped with
an LGB Multi-Train System Deco-
der (55020). The Decoder Interfa-
ce Cable (55026) is not required.
We strongly recommend decoder
installation by an LGB service
station. For more information,
contact your authorized LGB
retailer or an LGB service station
(see Authorized Service).
If this model is decoder-equipped,
you can control its sounds with
the Multi-Train System. With a
Loco Remote or Universal Remo-
te, press the numbered loco func-
tion buttons. With an MTS Train
Mouse, press the loco function
button the matching number of
times. For example, to trigger the
bell, press button "2" on the Loco
Remote or Universal Remote. If
you are using a Train Mouse,
press the function button twice to
Platform,
Werbung
