Product Information; Audio Systems - ergoline Turbo Power Gebrauchsanweisung

Please read and observe ...

Product information

Acrylic glass panels
The acrylic glass panels for the tanning devices are produced of acrylic
glass developed especially for this application. The acrylics used are
characterised by a particularly high UV permeability and resistance, as
well as an easy-care, hygienic surface that is gentle to the skin.
The acrylic glass panels are formed to their shapes for the specific devic-
es in a technically complex production process. Despite state-of-the-art
production know-how, the presence of minor spots, air bubbles or
streaks in the acrylic panels is unavoidable. In addition, hairline cracks
can occur during operation.
These occurrences are material-dependent and are unavoidable in
processing, however have no significant effect on the utility value and
can therefore not be recognised as defects.

Audio systems

On the rear side of the unit are two cinch (RCA) sockets, to which an au-
dio source can be connected (see page 55).
Caution!
Use of an amplified signal can damage the internal electronics.
The tanning unit is equipped with an amplifier. Thus the incom-
ing audio signal should not be amplified. The maximum permis-
sible input power is 2 V RMS.
37