Problems - ergoline Turbo Power Gebrauchsanweisung

Please read and observe ...

Problems

Faults Cause/Action
One or more of the UV The UV lamp is loose or it is defec-
lamps are not lighting tive.
up.
– Insert the UV lamp correctly or
replace it.
The starter is defective.
– Replace starter.
Tanning system is too Insufficient cooling.
hot.
– Clean air grills on the fans.
– Check to see if the tanning sys-
tem fans are working.
– Improve ventilation in the cabin.
The display does not No voltage.
illuminate.
– Check to see if the tanning sys-
tem has been connected to the
power supply and if the fuse and
FI
circuit breaker are switched on.
The display illuminates
A board or an internal fuse is defec-
and text is also
tive.
displayed but the lamps
– Call customer service.
do not work.
36
Page Faults
All of the lamps in a seg-
ment do not work.
52
The lamps start but the
tanning system fans or
the central body fan do
52
not work.
56
Call our customer service department if other problems occur –
see Page 2.
56
–
2
Cause/Action
A board or an internal fuse is defec-
tive.
– Call customer service.
A board or an internal fuse is defec-
tive.
– Call customer service.
Page
2
2