Troubleshooting - Olympus DR-1000 Bedienungsanleitung

Troubleshooting

For the latest information not included in the user manual, please refer
to the Online Help ( P.8).
Symptom Probable cause
Unable to use DSS Player (included in the
Directrec controls package) is not installed.
The [Remote Edit] window in
the DSS Player (included in
the package) is not open.
The sound volume in the
No playback tone
[Remote Edit] window is set to 0.
heard
The sound volume of your
computer is set to 0.
The Directrec was shaken
Noise heard
during recording.
during playback
The Directrec was placed
near a cell phone or
fluorescent lamp while
recording or during playback.
The microphone sensitivity is
Recording level
too low.
too low
Unable to set The maximum number of
index marks (16) has been
index marks
reached.
Cannot connect Sometimes a connection
cannot be made with some
to PC
PCs running Windows XP.
USB Audio Device is not
Unable to use
selected in the device settings
Directrec USB
of your PC.
microphone/
speaker.
34
Action
Install the DSS Player ( P.6).
Open the [Remote Edit]
window first and then use
Directrec.
Adjust the volume level.
Move the Directrec.
Set the microphone sensitivity
to Conference mode and try
again ( P.20).
Erase unnecessary index
marks ( P.23).
You need to change the PC's
USB settings. See DSS Player
Online Help for details ( P.8).
Go to the Windows [start]
menu, = [Control Panel] and
then select [Sounds and
Multimedia]. Open the [Audio]
tab and select USB Audio
Device as the setting for
"Sound Playback" and "Sound
Recording".