Inhaltsverzeichnis
Werbung
MAINTENANCE
Always disconnect the machine from the mains
before carrying out any maintenance work.
The machine is designed to function faultlessly for a long
period and with a minimum of maintenance. Extend its life-
span by regularly cleaning the machine and treating it cor-
rectly.
Cleaning
Regularly clean the machine with a soft cloth, preferably
after each use. Keep the ventilator slot free of dust and
other deposits.
Remove any tenacious deposits with a soft cloth moiste-
ned with soap. Do not use solvents (petrol, alcohol, ammo-
nia, etc.) as they will damage the plastic parts.
Lubrication
The machine does not need lubricating.
Faults
If a fault arises (due to e.g. element wear), contact the ser-
vice address listed on the warranty card.
ENVIRONMENT
We deliver the machine in sturdy packing in order to pre-
vent transport damage. Although the packing is mostly
made of reusable materials, please recycle it.
WARRANTY
Read the warranty stipulations on the enclosed warranty
card.
6
■
ClEl
( GB )
CONFORMITY STATEMENT
As sole responsible party, we declare that this product
corresponds to the following norms or normative
documents:
EN61029-1, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
in accordance with the stipulations of the guidelines:
98/37/EEC
73/23/EEC
89/336/EEC
as from 01-12-2002
GENEMUIDEN NL
W. Kamphof
Quality department
Montering af tværføringen
Fig. C.
Tværføringen (3) bruges til at save materiale i gering, idet
tværføringen (3) samtidig kan anvendes til at støtte mate-
rialet, når du fører det gennem saven.
Ferm
Ferm
BETJENING
3
Fig. D.
Følg altid sikkerhedsanvisningerne, og hold dig
til de relevante forskrifter.
Vipning af bordet
Bordet på denne dekupørsav kan vippes 45°. Det gøres
på flg. måde:
•
Løsn låsehåndtaget under bordet
•
Vip bordet med hånden, indtil den ønskede vinkel er
nået.
•
Vinklen kan aflæses på gradskalaen på maskinen.
•
Spænd låsehåndtaget fast igen.
45°
39
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
