System Settings - Bosch BPT-S 5 Hybrid Bedienungsanleitung

English
Bosch Power Tec GmbH
Info
If the storage system is connected to the Internet, we
recommend that you set the IP address automatically.
In addition, having your system connected to the
Internet enables better system support.
6.7

System settings

Depending on the country of installation, the grid
operator or the connection installed (e.g. max.
effective installed load of 3 kW) may require a
reduction in the maximum power fed into the grid
connection point. You can change these settings to
reduce the maximum power fed into the grid
connection point. This power can either be calculated
from the peak power installed (kWp) or preset by the
mains connection.
Here, you should enter the total power of the system
connected.
You want to change the settings of the solar
generator's PV power in the Plant window.
Prerequisites
You have received the password from the

manufacturer's service department.
Contact details can be found on the back of this
instruction manual.
▶
Procedure
1. Start window: Press System > Settings > Plant
The Plant window opens.
Changing the settings | 63
Storage system | User manual