Herunterladen Inhalt Inhalt Diese Seite drucken

Harvia Legend 150 Montageanleitung Seite 15

Vorschau ausblenden Andere Handbücher für Legend 150:
Inhaltsverzeichnis

Werbung

www.WellnessFass.ch
EN
Connecting the stove to a masonry flue via the
upper connection opening (figure 11)
You will need an angled smoke pipe (45° or 90°)
for the upper connection.
1. Move the blocking plug from the upper
connection opening on the rear connection
opening.
2. Bend the holding springs of the plug to the
sides through the upper connection opening so
that the plug tightly stays in place.
3. Attach the flue connection pipe to the upper
connection opening. Ensure that the pipe fits
tightly in place.
4. Push the stove in place. Do not block the flue
by pushing the flue connection pipe too far into
the flue. If necessary, shorten the pipe.
5. Seal the flue connection pipe to the opening
in the fireproof wall, for example, by using
fireproof mineral wool. Make sure that the flue
connection is tightly sealed. Add more fireproof
mineral wool if necessary.
X
Legend 150
180±5
Legend 240
200±5
Legend 300
210±5
X
1
Figure 11.
Connecting the stove to a masonry flue via the upper connection opening (all dimensions in millimeters)
Abbildung 11. Anschluss des Ofens an einen gemauerten Rauchfang über die obere Anschlussöffnung (alle
Abmessungen in Millimetern)
Wellness im eigenen Garten
A
B
C
D
830
1000
1380
1570
950
1080
1510
1640
1140
1280
1700
1840
2
DE
Anschluss des Ofens an einen gemauerten Rauchfang
über die obere Anschlussöffnung (Abbildung 11)
Für den oberen Anschluss wird ein Winkelofenrohr
(45° oder 90°) benötigt.
1. Versetzen Sie den Stopfen von der oberen An-
schlussöffnung auf die hintere Anschlussöffnung.
2. Biegen Sie die Befestigungsfedern seitwärts
durch die obere Anschlussöffnung, damit der
Stopfen nicht herausfällt.
3. Bringen Sie das Abzugsanschlussrohr an die
obere Anschlussöffnung an. Das Rohr muss
fest an seinem Platz sitzen.
4. Schieben Sie den Ofen an seine Position. Schie-
ben Sie das Abzugsanschlussrohr nicht zu weit
in den Rauchfang hinein. Kürzen Sie das Rohr,
falls notwendig.
5. Dichten Sie das Abzugsanschlussrohr in der
Öffnung der feuerfesten Wand ab, z.B. mit feu-
erfestem Mineralwolle. Der Abzugsanschluss
muss absolut dicht sein. Fügen Sie gegebenen-
falls mehr Mineralwolle hinzu.
~50
~50
3
052 347 37 27
VL22l
VL22l
~50
~50
5
info@wellnessfass.ch
4
15

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis