Audio Settings - Kenwood KDC-210UI Bedienungsanleitung

CD/USB/iPod/ANDROID
Listen to TuneIn Radio/TuneIn Radio Pro/Aupeo
(for )
While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the
iPod/iPhone to the USB input terminal of the unit.
• The unit will output the sound from these applications.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
USB
MUSIC DRIVE DRIVE CHANGE: The next drive ([DRIVE 1] to [DRIVE 5]) is selected
automatically and playback starts.
1 3
Repeat steps to
SKIP SEARCH 0.5%/1%/5%/10%: While listening to iPod or ANDROID source, selects
the skip search ratio over the total files.
10
ENGLISH
.
to select the following drives.

AUDIO SETTINGS

While listening to any source...
1 Press the volume knob to enter [FUNCTION].
(Except for
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2
4 Press and hold
To return to the previous setting item, press
AUDIO CONTROL
SUB-W LEVEL * –15 to +15 (0)
BASS LEVEL –8 to +8 (+2)
MID LEVEL –8 to +8 (+1)
TRE LEVEL –8 to +8 (+1)
Default: XX
EQ PRO (This setting is stored to [USER].)
BASS ADJUST BASS CTR FRQ
BASS LEVEL
BASS Q FACTOR
BASS EXTEND
MID ADJUST MID CTR FRQ
MID LEVEL
MID Q FACTOR
TRE ADJUST TRE CTR FRQ
TRE LEVEL
) Press AUD to enter [AUDIO CONTROL] directly.
until the desired item is selected or activated.
to exit.
Adjusts the subwoofer output level.
Adjusts the level to memorize for each source. (Before
making an adjustment, select the source you want
to adjust.)
60HZ/80HZ/100HZ/200HZ or 60/80/100/200:
Selects the center frequency.
–8 to +8 (+2): Adjusts the level.
1.00/1.25/1.50/2.00: Adjusts the quality factor.
ON: Turns on the extended bass. ; OFF: Cancels.
0.5KHZ/1.0KHZ/1.5KHZ/2.5KHZ: Selects the center
frequency.
–8 to +8 (+1): Adjusts the level.
0.75/1.00/1.25: Adjusts the quality factor.
10.0KHZ/12.5KHZ/15.0KHZ/17.5KHZ: Selects the
center frequency.
–8 to +8 (+1): Adjusts the level.
.
Default: XX