Advanced Function Programming; Register Number And Consecutive Number Programming - Sharp XE-A113 Bedienungsanleitung

ADVANCED FUNCTION PROGRAMMING

Register Number and Consecutive Number Programming

1
The register number and consecutive numbers are printed on every receipt or journal.
When your store has two or more registers, it is practical to set separate register numbers for identification. The
consecutive number is increased by one each time a receipt is issued or when a journal print occurs.
For consecutive number programming, enter a number (max. 4 digits) that is one less than the desired starting
number.
Register number
s 1
Key operation example
123456
Consecutive number
s 2
Key operation example
52
To set the register number "0"
@
Register number (one to six digits)
s @
1
s A
@
A number (one to four digits) that is one
less than the desired starting number
s @
2
s A
1000
To begin the count from 0001
s A
Print
Register number
s
Print
Consecutive
number
A