Battery Mounting - Carson X4 MICRO Betriebsanleitung

5. Nick sensitivity setup – Expert mode
Hold down the nick/roll stick for 1 second to enter the setting status.
Press throttle/turn key until the five-point dotted line symbol starts to
flash (see picture beside). Press nick trim to set the sensitivity and then
hold down the nick/roll stick for 1 second to confirm and exit.
6. Roll sensitivity setup – Expert mode
Hold down the nick/roll stick for 1 second to enter the setting status.
Press the throttle/turn key until the five-point dotted line symbol
starts to flash (see picture beside). Press roll trim to set the sensitivity.
And then hold down the nick/roll stick for 1 second to confirm and
exit.
g. Battery Mounting
Caution:
• Do not mix old and new batteries/rechargeable batteries.
• Do not mix different types of batteries.
• Do not charge non-rechargeable batteries.
1
Release the screw.
4
2
Take away the battery cover.
Push
Return the cover.
Pull
5
Fasten the screw.
CARSON x4 Micro Quadcopter 500507056
Flashing
Flashing
3
According to the correct polarities, install
4 x AAA batteries.
GB
31