Fohhn Arc-Top active Bedienungsanleitung Seite 41

Specifications
Amplifier Electronics
Fohhn Audio DSP
Digital amplifier
(integrated in XT-33/4/5 und AT-35/40/50)
EIA amplifier power ch1 internal
EIA amplifier power ch2 exteral
(1 kHz, THD+N < 1 %)
Amplification
Input sensitivity
Input impedance
Frequency response
S/N Ratio
Slew Rate
Protective circuit
impedance- and short-circuit protection,
DC-Protect, temperature monitoring
Power supply 195 V – 250 V AC 50/60 Hz, max. 10 A
Cooling
Force cooling, Temperature-conrolled fan
Weight. 1.8kg power supply and amplifier
Software updates under:
www.fohhn.com / Downloads
This equipment conforms to standards EN 61000-6-1, EN 61000-6-3 and EN 60065
We reserve the right to alter the specifications without notice.
1000 W/ 8Ohm
1000 W/ 8Ohm
35 dB
0 dB V
10 kOhm
20 Hz – 20 kHz
> 105 dBA
50 V/ms
Switch-on delay, soft start
Convection cooling
Controllers
56-bit double precision filter technology
selektive 3-band limiting (bass/mid/high)
band specific time constants
speaker presets (data base for all Fohhn® speaker systems)
remote control via laptop, Fohhn Audio Soft
and USB/RS-485 adapter (Audio.net)
linking to a media control system
Controls
Indicator LEDs
receive/send remote control LED
Connectors
Inputs 2x XLR/jacks, multifunctional input jacks
Outputs
1x NL4 Neutrik Speakon 8Ω
2x Powercon mains jacks in and thru
2 digital signal prozessors
AD/DA 24 bit/48 kHz
8 independent limiters
User Presets
Select Regler
4 buttons for DSP handling
ground/lift switch
Power on/off switch
4 line display
2x signal/Clip LED
2x run/protect LED
1x status LED (front)
2x XLR Link jacks
2x Network jack RS-485
Top active | 41