X-Top Active, Features - Fohhn Arc-Top active Bedienungsanleitung

X-Top active
5.1.1 Features X-Top active
XT-33 active
+ Highpower fullrange system
+ components: 12"/1" CD neodym.,
+ Dispersion HxV: 90°x60°,
+ integral DSP-amplifier for connection a passive X-Top or Sub
+ 2x 1000 watts/8Ω, class D, Fohhn Audio DSP, networkable/ remote control
+ Multifunctional housing also suitable for monitor operation, speaker pole, ring stud for safety ring, handles,
sliding rails, mounting devices for U-bracket VXT-3
XT-4 active
+ Highpower fullrange system
+ components: 12"/1,4" CD neodym.,
+ Dispersion HxV: 80°x50°,
+ integral DSP-amplifier for connection a passive X-Top or Sub
+ 2x 1000 watts/8Ω, class D, Fohhn Audio DSP, networkable/ remote control
+ Multifunctional housing also suitable for monitor operation, speaker pole, ring stud for safety ring, handles,
sliding rails, mounting devices for U-bracket VXT-3
XT-5 active
+ Highpower fullrange system
+ components: 15"/1,4" CD neodym.,
+ Dispersion HxV: 80°x50°,
+ integral DSP-amplifier for connection a passive X-Top or Sub
+ 2x 1000 watts/8Ω, class D, Fohhn Audio DSP, networkable/ remote control
+ Multifunctional housing also suitable for monitor operation, speaker pole, ring stud for safety ring, handles,
sliding rails, mounting devices for U-bracket VXT-5
26 | Top active
(full neodymium)
(full neodymium)
(full neodymium)
Top active
DSP-amplifier
2x 1000 watts/8Ω
Fohhn Audio DSP
four-line display, blue
EQ, Compressor/Limiter, Delay,
Remote Control, Status display,
Sound Presets
ch1 + ch2 input + slave
ch2 output for connection of
another passive Top or Sub
Netzwork ports for laptop
connection RS485
Powercon mains ports
USB adapter
Top active (fully neodym. / ClassD stereo amplifier)
with integral DSP 2-channel amplifier for connection
of another passive Top.