Memory Card - Spypoint TINY-HD Bedienungsanleitung

12
Solar panel
This model also offers the possibility of a connection to
a solar panel SP-12V (sold separately, refer to the section
OPTIONS) to maintain the charge of the lithium battery
(sold separately, refer to the section OPTIONS). During the
installation of the rechargeable lithium battery pack, slide
the switch inside the battery case to RECH to activate the
charging system of the solar panel.
Power source
• 6AA
• 12V
• 12V + 6AA
• LIT-09
• 12V + LIT-09
• Solar panel + LIT-09
Switch position
ALK
RECH

MEMORY CARD

Using a memory card (sold separately, refer to the section
OPTIONS) is required to operate the camera. When the
camera is turned on, the screen displays "Insert memory
card" in PHOTO, VIDEO or TEST mode if no memory card
is used, the camera also beeps. The camera is compatible
with SD/SDHC memory card, up to 32 GB capacity. Before
inserting or removing the memory card, the camera must
be turned off. Failing to do so may cause loss of or damage
the pictures already recorded from the memory card. When
the SD card is full, the viewing screen indicates "Disk full"
when PHOTO, VIDEO or TEST mode are selected. The
following data shows an approximate quantity of photos or
video length that can be taken by the camera depending on
the memory card capacity.
RESOLUTION 2.0 GB
3 MP 2000
5 MP 1700
7 MP 1400
8 MP 1200
VIDEO 2.0Go
RESOLUTION
640 x 480 65 min
1280 x 720 (720p) 20 min
"BUSY" LED
The "BUSY" light, located beside the LCD screen, lights up
when the camera records a file.
4.0 GB 8.0 GB 32 GB
4100 8200 32800
3400 6800 27300
2700 5500 21800
2400 4800 19000
4.0Go 8.0Go 32Go
2h10 4h10 16h40
40 min 1h20 5h20
13